Filter
Top Products
154
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
PRESET CH + X ON/STANDBY
PRESET CH –
1
Turn off the power using X.
2
Press X ON/STANDBY while simultaneously pressing PRESET CH + and PRESET
CH –
.
3
Once the display starts ashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
Basic version
Advanced version
InformationInformation
DVD