Marantz SR5000 Stereo Receiver User Manual


 
ENGLISH
STADIUM
3 STEREO
THEATER HALL
CHURCH
PRO-LOGIC
c.When Pro-Logic mode:
Center speaker LARGE SMALL NONE
When the selection is finished, SET button is pushed. Then displayed
change to sub woofer ON or OFF
Sub woofer: ON OFF
When the selection is finished, SET button is pushed. The display
returns to the origin.
d.When 3-Stereo mode:
Center speaker LARGE SMALL
When the selection is finished, SET button is pushed. Then displayed
change to sub woofer ON or OFF
Sub woofer: ON OFF
When the selection is finished, SET button is pushed. The display
returns to the origin.
e.Other surround, stereo mode
Sub woofer: ON OFF
When the selection is finished, SET button is pushed. The display
returns to the origin. Mode of center/surround and sub woofer mode
is memorized.
!7 MASTER VOLUME CONTROL
Adjust the overall sound volume from the front, center, (sub woofer)
and rear speakers with this control.
Pre-Out (front, rear, center, sub woofer) can also be controlled.
!8 RDS Functions
a. SEARCH button
This key is used to search a station broadcasting, TP or PTY data by
scanning.
Press the DISPLAY Button then press the SEARCH button.
Now “RDS” is displayed, each further press of the SEARCH button
changes the display as shown below.
TP / PTY / FREQUENCY
When the desired item is displayed, press the TUNING UP or DOWN
button to start scanning.
b. DISPLAY button
Each press of this button changes the display contents as shown
below.
FREQUENCY / STATION NAME / PROGRAM NAME /
TIME(CLOCK) / TEXT / FREQUENCY
However, the above is not displayed when there is no RDS data with
the station being received.
c. PTY (PROGRAM TYPE)SELECT button
When “PTY” is selected with the SEARCH button, select the desired
program type by pressing the PTY SELECT button.
When the desired program type is displayed, press the TUNING UP or
DOWN button to start scanning.
!9 SURROUND MODE knob
Surround mode changes as follows whenever you adjust this knob.
For the digital equipment: CD, LD, DVD. (when selected optical or
coaxial input)
For the digital equipment: CD, LD, DVD. (when selected analog input)
For the analog equipment: TUNER(AM/FM), TAPE-1, TAPE-2, VCR
@0 STEREO(SURROUND OFF) button
When switching from surround mode to stereo mode, this button is
pushed.
When Dolby digital mode, This Button operates as down mix (2
channel) function and FTD’s “STEREO”indicator is light up.
@1 DIGITAL SELECT. button
Push this button to switch the digital signal (When CD, LD, DVD.
selected)
When CD function
a. DTS mode
Optical / Coaxial-1 / Coaxial-2
b. Stereo, Pro logic, 3 Stereo, Other surround (Hall etc.) mode
Optical / Coaxial-1 / Coaxial-2 / Analog(Digital off)
When DVD. function
a. DTS, Dolby Digital mode
Optical / Coaxial-1 / Coaxial-2
b. Stereo, Pro logic, 3 Stereo, Other surround (Hall etc.) mode
Optical / Coaxial-1 / Coaxial-2 / OFF (analog)
When LD/TV function
a. Dolby Digital, mode
Optical / Coaxial-1 / Coaxial-2
b. DTS mode
Optical / Coaxial-1 / Coaxial-2
c. Stereo mode
Optical / CoaxiaI-1 / Coaxial-2 / Analog
d. Dolby Pro logic, 3 Stereo, Other surround
Optical / CoaxiaI-1 / CoaxiaI-2 / Analog
STADIUM
3 STEREO
THEATER HALL
CHURCH
PRO-LOGIC
DTS
3 STEREO
THEATER
CHURCH
STADIUM
Dolby Digital
PRO-LOGIC
HALL
Front panel features
(See page 108 )
q POWER switch
When this switch is pressed once, the power turns ON and display
appear on the display panel. When pressed again, the power turns OFF.
After initialization or resetting, press this switch to enter the
standby mode. To turn the power ON, press any of the function
buttons of the main unit or the POWER button of the remote control
unit.
w SPEAKERS (ON-OFF) button
Use this button to select speaker system ON or OFF
e PHONES socket for stereo headphones
This jack is compatible with a wide range of conventional dynamic
headphone types.
NOTE:
Change the surround mode to STEREO when using the headphones.
r Tuning/Preset UP/DOWN, F/P(frequency/preset) buttons
During AM or FM reception, you can scan to other frequencies or preset
number by pressing these buttons.
t FM MODE button
Press this button to select stereo or monaural mode, when listening to
FM broadcasts.
y MEMORY button
Press this button to memorize the desired station frequency. Please
see Page 9 for a detailed usage.
u BASS CONTROL knob
Adjust the low frequency level with this control according to your taste
and room acoustics.
i TREBLE CONTROL knob
Adjust the high frequency level with this control according to your taste
and room acoustics.
o BALANCE CONTROL knob
Adjust the sound volume between left and right front speakers with
this control knob.
!0 VCR2 audio/video input jacks
Connect the audio/video output of the second VCR, etc. to these IN
jacks.
!1 Input selector button
This button selects the audio or audio/video source. The selected
source name will be displayed on FTD. Pushing this button in the
standby mode, allows to turn the power ON.
!2 SET button
When speaker mode is decided, this button is pushed.
!3 Mid night button (for Dolby digital, Digital Down mix mode only)
The source with large dynamic range is compressed.
!4 6-CH INPUT button
When selecting to other surround processor and/or equipment (example
MPEG2), this button is pushed. SR5OOO enters the state which can be
controlled to the input of 6 channels even if any state. All the displays
concerning surround mode are off. SR5OOO returns to former state
when 6 channel direct is made off.
!5 REMOTE SENSOR
This SENSOR receives the signals from the remote control unit.
!6 SPEAKER MODE button
Adjusting the settings of the center ,surround and sub woofer speaker
mode as follows. The setting of the main speakers can be switched
between LARGE SMALL except in case “e” below.
Press the speaker mode button:
a.When DTS mode:
Center speaker LARGE SMALL NONE
When the selection is finished, SET button is pushed, then display
changes to surround speaker mode
Surround speaker LARGE SMALL NONE
When the selection is finished, SET button is pushed.Then displayed
changes to sub woofer ON or OFF
Sub woofer: ON OFF
When the selection is finished, SET button is pushed. The display
returns to the origin.
b.When Dolby Digital mode:
Center speaker LARGE SMALL NONE
When the selection is finished, SET button is pushed. Then displayed
change to surround speaker mode
Surround speaker LARGE SMALL NONE
When the selection is finished, SET button is pushed.Then displayed
change to sub woofer ON or OFF
Sub woofer: ON OFF
When the selection is finished, SET button is pushed. The display
returns to the origin.
7