Filter
Top Products
ENGLISH
5
DISP AUTO TUNED ST V
–
OFF NIGHT PEAK ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT DISC 6.1 MTX 6.1 EQ
DIGITAL
SURROUND
PCM
L
C
R
SL S SR
LFE
SPKR B
¡7
¡6
f
s
a
¡5
g jl¡1 ¡3d
h ¡0
¡2
¡4k
FL DISPLAY
a
DISP (Display Off) indicator
This indicator is illuminated when the SR4500 is in
the display off condition.
s
SLEEP timer indicator
This indicator is illuminated when the sleep timer
function is active.
d
AUTO SURR (Auto Surround mode)
indicator
This indicator is illuminated to show that the AUTO
SURROUND mode is in use.
f
TUNER’s indicators
AUTO : This indicator illuminates when the
tuner’s Auto mode is in use.
TUNED : This indicator illuminates when a
station is being received with
sufficient signal strength to provide
acceptable listening quality.
ST(Stereo) :
This indicator illuminates when an
FM station is being tuned into stereo
condition.
g
DTS-ES mode indicators (DISC6.1, MTX6.1)
These indicators will illuminate to show the DTS-
ES decoding mode (Discrete 6.1 or Matrix 6.1).
h
V (video)-OFF mode indicator
This indicator is illuminated when the Video-OFF
function is active.
¡4
SIGNAL FORMAT indicators
2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24,
PCM
When the selected input is a digital source, some
of these indicators will be illuminated to display the
specific type of signal in use.
¡5
ENCODED CHANNEL STATUS
indicators
These indicators display the channels that are
encoded with a digital
input signal. If the selected digital input signal is
Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”,
“SL”, “SR” and “LFE” will be illuminated. If the
digital input signal is 2 channel PCM-audio, “L” and
“R” will be displayed.
If Dolby Digital 5.1ch signal with Surround EX flag
or DTS-ES signal comes in, “L”, “C”, “R”, “SL”, “S” ,
“SR” and “LFE” will be illuminated.
¡6
Main Information Display
This display shows messages relating to the
status, input source, surround mode, tuner,
volume level or other aspects of unit’s operation.
¡7
DIRECT (Pure direct) indicator
This indicator is illuminated when the SR4500 is in
the PURE DIRECT mode.
j
NIGHT mode indicator
This indicator is illuminated when the SR4500 is in
the Night mode, which reduces the dynamic range
of digital program material at low volume levels.
k
SPKR (Speaker) B indicator
This indicator is illuminated when the S(Surround)
speaker B system is active.
l
PEAK indicator
This indicator is a monitor for an analog audio input
signal. If the selected analog audio input signal is
greater than the capable level of internal processing,
this will illuminate. If this happens, you should press
the ATT button on the front panel or the remote.
¡0
EQ mode indicator
This indicator is illuminated when the HT-EQ
function is active.
¡1
ATT (Attenuation) indicator
This indicator is illuminated when the attenuation
function is active.
¡2
DIGITAL Input Indicator
This indicator lights when a digital input has been
selected.
¡3
ANALOG input indicator
This indicator is illuminated when an analog input
source has been selected.
@2
HEADPHONE jack for stereo headphones
This jack may be used to listen to the SR4500’s
output through a pair of headphones. Be certain
that the headphones have a standard 1 / 4" stereo
phono plug. Note that the main room speakers will
automatically be turned off when the headphone
jack is in use.
Notes:
• When using headphones, the surround mode will
change to STEREO and TruSurround (TS)
headphones by SURROUND MODE button.
•
The surround mode returns to the previous setting
as soon as the headphone plug is removed from the
jack.
04.5.14, 4:13 PMPage 5