Marantz PM6002 Stereo Amplifier User Manual


 
2
ENGLISH
BEFORE USE
This section must be read before any connection is
made to the mains supply.
7
Equipment mains working
setting
Your Marantz product has been prepared to comply
with the household power and safety requirements
that exist in your area.
PM6002 can be powered by 230V AC only.
7
Copyright
Recording and playback of any material may
require consent. For further information refer to the
following:
— Copyright Act 1956
— Dramatic and Musical Performers Act 1958
— Performers Protection Acts 1963 and 1972
— Any subsequent statutory enactments and
orders
7
Do not locate in the following
places
To ensure long-lasting use, do not locate the
PM6002 where:
• Exposed to direct sunlight.
• Near to sources of heat such as heaters.
• Highly humid or poorly ventilated.
• Dusty.
• Subjected to mechanical vibrations.
• On wobbly, inclined or otherwise unstable
surfaces
• Radiated heat is blocked such as in cramped
audio racks.
To ensure proper heat radiation, ensure the below
clearance from walls and other equipment.
Left
0.2 m or more
Above
0.2 m or more
Right
0.2 m or more
Rear
0.2 m or more
7
Keep objects off
Keep objects off the PM6002. Blocking the vent can
result in accident and damage.
7
Do not touch hot spots during
and Immediately after use
During and immediately after use, the PM6002
is hot in areas other than the controls and rear
panel connection jacks. Do not touch hot spots and
especially the top panel. Contact with hot areas can
cause burns.
FEATURES
• Toroidal Transformer
• Custom Capacitor
New Design for Discrete Amplifi er Circuits
Improved and optimized the circuit design, parts and pattern wiring
Input buffer Circuit for High S/N ratio and Channel separation
New aluminum front panel and aluminum cap knob
Gold Plated Dual Speaker Terminals 1 & 2
Full REC Selector
Active Filter type Tone Control circuit