Filter
Top Products
5
ENGLISH
REAR PANEL
NAMES AND FUNCTIONS OF PARTS
ABC D E F G H I J
A PHONO INPUT JACKS
Connect the output jacks of a turntable to these jacks.
B GND (GROUND) TERMINAL
Connect the grounding wire from the turntable to this
terminal.
C TUNER INPUT JACKS
Connect the output jacks of the tuner to these jacks.
D CD PLAYER INPUT JACKS
Connect the output jacks of a Compact Disc player to
these jacks.
E AUX/DVD INPUT JACKS
These are auxiliary input jacks which can be used to
connect the audio outputs of AV components such as DVD
players, TV multiplex/stereo audio tuners, VCRs, and
laserdisc players.
F RECORDER 2 (MD/TAPE) IN/OUT JACKS
Connect the play (output) jacks and record (input) jacks of
MD or tape decks to these jacks.
G RECORDER 1 (CD-R) IN/OUT JACKS
Connect the play (output) jacks and record (input) jacks of
CD Recorder to these jacks.
H SPEAKER SYSTEMS 1 / 2 TERMINALS
Connect your speaker system(s) to these terminals.
I REMOTE CONTROL BUS TERMINALS
(REMOTE CONT. BUS)
Another item of audio equipment with a remote control bus
terminal can be connected to these terminals by using a
special-purpose cable. The bus OUT terminal is used to
send signals to another item of equipment. The bus IN
terminal is used to receive signals from another item of
equipment.
J POWER CORD
Connect to a household power outlet.
RC4001PM REMOTE CONTROLLER
The RC4001PM can be used to control a Marantz AV component
equipped with a remote sensor as well as other Marantz
components connected to the first component through the
Remote Control Bus. The buttons of the RC4001PM are laid
out on its control panel according to the functional groups as
described below.
z POWER ON/OFF buttons
a. MAIN POWER ON button
Turns the PM4001 power on when it is in the standby
mode.
b. MAIN POWER OFF button
Sets the PM4001 power to the standby mode when it is set
to the power-on mode.
x
z
c
v
05.7.6, 0:06 PMPage 5