Auto DBS RecordLink 39
If you connect your VCR to a satellite tuner that has the
Electronic Program Guide, the VCR will turn itself on, record,
then turn itself off. First, read the owner’s manual of your satellite
tuner; then, follow these steps to set up your VCR. Before you
begin:
● Use audio and video cables to connect the AUDIO/VIDEO IN
jacks on the back of the VCR to the AUDIO/VIDEO OUT jacks
on the satellite tuner.
● Press the SPEED button to select the desired tape speed (SP,
LP, or SLP).
1
Set the program to be recorded on the satellite tuner.
See your satellite tuner owner’s manual for details.
5
Press the PLAY/o button or the STOP/p button to select
DBS RECORD LINK. Then, press the F.FWD/B button
so that ON appears beside DBS RECORD LINK. The
menu shown below will appear. After 30 seconds, the VCR will
turn itself off and the Timer light will appear on the VCR display
panel.
3
Press the MENU button.
4
Press the PLAY/o button or the STOP/p button to select
VCR SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
→PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
REMOTE LOCATOR
TO END PUSH EXIT
SELECT op CHOOSE B
→REPEAT PLAY OFF
ON SCREEN MODE
LANGUAGE
VCR PLUS+ REF. MAP
DBS RECORD LINK OFF
TO END PUSH EXIT
FOLLOW THE STEPS BELOW:
1 SET TIME ON DBS
2 TURN DBS OFF
3 CONNECT A/V IN TO VCR
VCR WILL BE TURNED OFF
AUTOMATICALLY FOR AUTO
DBS RECORD LINK.
SEE OWNERS MANUAL FOR
DETAILED INFORMATION.
2
Press the VCR button.
VAR.SLOW
VCR TV CBL/DBS
VOL.
CH.
MUTE
+100
3
6
9
0
2
5
8
1
4
7
VCR/TV
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWDREW
MEMORY
SLOW
VCR PLUS+
/ENTER
EJECT
MENU
CLEAR
PAUSE/STILL
3
5
4
2
• To cancel the Auto DBS RecordLink
recording, press the POWER button
to turn on the VCR. The VCR sets
DBS RECORD LINK to OFF auto-
matically.
• To stop an Auto DBS RecordLink
recording that is in progress, press
the STOP/EJECT button on the VCR.
• If the preset time for an Auto DBS
RecordLink comes up during a timer
recording, the timer recording has
priority.
• If a program has copy guard pro-
tection, it may not record clearly.
• If noise appears on the TV screen
when you view a program, connect
the satellite tuner directly to the TV.
• When you use this feature, the first
few seconds of a program may not
be recorded.
• If your satellite tuner has the syn-
chronized timer feature by the
broadcasting time of a program,
refer to the tuner’s owner’s manual.
Helpful Hints
1
Set the program to
be recorded on the
satellite tuner.
VRZ342comb.QX33 4/7/99 10:06 PM Page 39