Filter
Top Products
46 Time Search
Time Search
Follow the steps below to program the VCR to search forward or
backward a specific length of time.
2
Press the TIME SEARCH button to bring up the time search
display. There must be a tape in the VCR.
3
Within 10 seconds, use the Number buttons to enter the
desired length of time you want to skip forward or back-
ward. For example, for 1 hour, 25 minutes, press Number but-
tons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5.
(Make an entry within 10 seconds of pressing the TIME SEARCH
button. Otherwise, the VCR will exit Time Search mode.)
4
Within 10 seconds, press the Fast Forward button or the
Rewind button to skip forward or backward. The VCR will
skip over the specified length of time, then begin playback. (The
time counts down on-screen as the searching progresses.)
• If you want to search for more than
59 minutes, you must enter the
length of time in hours and minutes.
For example, to search forward 70
minutes, press 1,1,0 at step 3.
• You can not enter the TIME
SEARCH menu when you are in
Recording mode.
• You can remove the Time Search
display by pressing the TIME
SEARCH button again.
• To cancel the Time Search when
the VCR is fast forwarding or
rewinding, press the STOP button
once or the TIME SEARCH button
twice.
Helpful Hints
TIME SEARCH
0:00
ENTER SEARCH TIME
2
3
4
1
Press the VCR button.
1
CBL/DSS VCR TV
PAUSE
/STILL
POWER
VCR PLUS+
/ENTER
F.ADVSLOW
STATUS/EXIT
CLEAR
MENU
VOL CH
1
4
7
100
2
5
8
0
3
6
9
A.CH
REC/OTR
SPEED
INDEX
SEARCH
SKIP
SEARCH VCR/TV
MEMORY
EJECT X2 PLAY
VAR.SLOW TRACKING
TIME SEARCHREC END SEARCH
MUTE
JOG & SHUTTLE
C
C
V
V