Magnavox MAS-100/37 Stereo System User Manual


 
28
English
8240 009 34231
GENERAL
The system does not react when buttons Remove and reconnect the AC power plug and
are pressed. switch on the system again.
Sound cannot be heard or is of poor Adjust the volume.
quality. Disconnect the headphones.
Check that the speakers are connected correctly.
Check if the stripped speaker wire is clamped.
The left and right sound outputs are Check the speaker connections and location.
reversed.
The remote control does not function Select the source (CD 1/2/3 or TUNER, for
properly. example) before pressing the function button
(É,í,ë).
Reduce the distance between the remote
control and the system.
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
Point the remote control directly towards the IR
sensor.
The timer is not working. Set the clock correctly.
Press and hold CLOCK•TIMER to switch on the
timer.
If recording or tapes dubbing is in progress, stop
recording.
The Clock/Timer setting is erased. Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The system displays features Press and hold Çon the system to switch off
automatically. the demonstration.
Troubleshooting