Filter
Top Products
Clock Setting Programming
Setting the Clock with the Radio OFF
1. Turn the vehicles ignition key to
the “ON” or “ACC” position to pro-
vide power to the radio. You will
know that radio has sufficient
power as the clock will be displayed
in the LCD display window (9).
2. Press the ‘R.FREQ” button (7) and
hold it down.
3. Adjust the HOURS by pressing the
“ “ (down) tuner control button
(5) until the correct hour is dis-
played. Note: The clock is a 12
hour clock and does not indicate “
AM or PM”.
4. Adjust the MINUTES by pressing
the “ “ (up) tuner control button
(5) until the correct minutes are
displayed.
Setting the Clock with the Radio ON
1. While the radio is on, press the
‘R.FREQ” button (7) to display the
time. Hold the button down.
3. Adjust the HOURS by pressing the
“ “ (down) tuner control button
(5) until the correct hour is dis-
played.
Note: The clock is a 12 hour clock
and does not indicate “ AM or
PM”.
4. Adjust the MINUTES by pressing
the “ “ (up) tuner control button
(5) until the correct minutes are
displayed.
Programming the Radio Station
Recall Buttons
1. Rotate knob (1) clockwise to turn
on the unit. Adjust the volume
knob (1) to a normal listening
level.
2. Use the band button (4) to select
the AM or FM radio band you want
to memorize radio stations to. The
FM band has 3 banks (FM 1, 2, and
3). The AM band has 2 banks (AM
1 and 2). Continue pressing the
band button (4) until the desired
radio band is displayed (9a).
3. Use the tuning button (5) to select
a desired radio station. Press the
“ ” (up) button to tune to high-
er radios stations. Use the “ ”
(down) button to tune to lower
radio stations. Pressing and releas-
ing the tuning control buttons (5)
will cause the tuner to move up or
down two decimal increments.
Pressing and holding the up or
down tuning buttons (5) will cause
the tuner to count up or down at
high speed.
4. Once the desired station is select-
ed, press and hold down one of the
5 station recall buttons (10) until
the channel indicator (9d) is
displayed, release the button. The
station is now memorized to the
band indicated (9a) and the recall
button indicated (9d). Repeat pro-
cedures 2 thru 4 for all 5 preset
buttons.
5. Select another radio bank and
repeat steps 2 thru 4 above to
memorize all 15 FM radio stations
and 10 AM radio stations.
9
<
<
<
<
<
<