Mackie 1800SA Speaker User Manual


 
11
FUSSION 1800SA/1800S SPECIFICATIONS
Physical Properties
Enclosure:
18mm multi-layered birch wood
Enclosure Geometry:
Rectangular
Handles:
4 each aluminum/rubber grips
Mounting Methods:
Floor mount only
Height: 32.9˝ (836mm)
Width: 23.6˝ (600mm)
Depth: 23.6˝ (600mm)
Weight:
1800SA 145 lbs. (65.8kg)
1800S 106 lbs. (48.1kg)
23.6" (600mm)
23.6" (600mm)
32.9" (836mm)
23.6" (600mm)
FUSSION 1800
23.6" (600mm)
TOP
System Specifications
Frequency Range (–10 dB):
38Hz-160Hz
Frequency Response (–3 dB):
40Hz-150Hz
Maximum SPL (long term):
136 dB @ 1m (system)
Maximum SPL (peak): 139 dB @ 1m (system)
Recommended Crossover Point:
85Hz
Transducers
Low-Frequency Transducers—Two Each
Cone Diameter: 18˝ (457mm)
Voice Coil Diameter: 4.0˝ (100mm)
Nominal Impedance: 8 ohms
Power Handling: 800W rms (long term)
1
Power Amplifiers
Low-Frequency Power Amplifier—Two Each
Rated Power: 2000W continuous @ 4
2500W peak @ 4
Rated THD: < 0.03%
Audio Input/Output
Input Impedance: 20k ohms (F1800SA)
4 ohms (F1800S)
Input Type: Balanced differential
Speaker Level Output (1800SA): EP4 female
Speaker Level Input (1800S): EP4 male
Line Input Power
US: 115V, 60Hz
Recommended Amperage Service:
12A recommended
AC Connector: 3-pin Twistlock
250VAC, 20A male
Europe: 230V, 50Hz
Recommended Amperage Service:
8A recommended
AC Connector: 3-pin IEC
250VAC, 16A male
In-rush Current Protection: Transistor-based
Safety Features
(Provided by FUSSION full-range or mid-high speaker
systems only; no onboard controls in 1800SA)
RMS Limiting: Monitoring and limiting
of continuous RMS
output of amplifiers
Thermal Protection: Input stage shutdown,
auto-reset
Disclaimer
Since we are always striving to make our
products better by incorporating new and improved
materials, components, and manufacturing methods,
we reserve the right to change these specifications at
any time without notice.
“Mackie,” the “Running Man” figure, and
“FUSSION” are trademarks or registered trade-
marks of Mackie Designs Inc.
All other brand names mentioned are trade-
marks or registered trademarks of their respective
holders, and are hereby acknowledged.
©2000 Mackie Designs Inc.
All Rights Reserved.
Printed in Italy.
1
Power handling for transducers is based on an AES long term power
testing standard conducted for 100 hours full power, free air.