Filter
Top Products
19
Technical Specifi cations
Analog inputs
Parameter Value Note
Balanced input connectors 3 pin XLR female, gold plated Case=Gnd, Pin1=Gnd,
Pin2=Hot(+), Pin3=Cold(-)
Balanced input CMRR -40dB 20 Hz-20 KHz.
Unbalanced input connectors RCA (phono) jack, gold-plated. Case=Gnd, Tip=Hot(+)
Input impedance 10K Ohm
Input sensitivity 550mV to 4.4V For full-scale output.
L/R crosstalk, 20 Hz-20 KHz -111dB
Frequency linearity L/R, 20 -20k
Hz
±0.07dB
Frequency response (-3dB) <10 – 45k Hz
THD+N Ratio, A wgt (0dbFS) 0.0002% / 114dB Gain 0dB
S/N Ratio:THD +N, A wgt (-
60dBFS)
124dB
Phono input
Parameter Value Note
Unbalanced input connectors RCA (phono) jack, gold-plated. Case=Gnd, Tip=Hot(+)
Input load resistance 20, 100, 200 or 47k Ohm
Input load capacitance 100 pF or 430 pF
Input sensitivity 400 uV to 204 mV For full-scale output.
L/R crosstalk, 20 Hz-20 KHz -100dB
Frequency linearity L/R, 20 -20k
Hz
±0.02dB
Frequency response (-3dB) <10 – 39k Hz
THD+N Ratio, A wgt (0dbFS) 0.0003% / 113dB Gain 28
S/N Ratio:THD +N, A wgt (-
60dBFS)
72 -122dB Gain 82 – 28dB
Millennium interface
Parameter Value Note
Millennium Interface connector 5 pin XLR male, gold-plated Case=Gnd, Pin1=Gnd, Pin2=18
V, Pin3=Comm, Pin4=RefClk,
Pin5=Audio
Output sample rate 48kHz, 96kHz or 192kHz
Output protocol SPDIF