Filter
Top Products
- 7 -
Front panel
Fig 1: CD-1 front panel
Front panel controls and functions
The buttons/controls on the front panel of the CD-1 can all be used either by directly
pressing them on the front panel or by operating the similar keys on the included remote
control. All keys on the front panel except the Mains switch (1) can be found on the remote
control. Additional buttons on the remote control include the following: random, repeat, A/B
and the digits 0-9. Please note the left < and right > arrows in the center button area of the
remote control work exactly like the Skip/Search buttons |<< / >>| on the front panel. The
play/pause buttons and the Enter button also work in exactly the same way.
(1) Mains switch
Powers the CD-1 on/off.
(2) Standby button
Standby mode, this can also be selected on the remote control.
(3) Eject
The CD Loader Tray can be opened and closed using the eject button. If the button is
pressed during play mode, the disc will be stopped before the tray is opened.
(4) The CD Loader Tray
While the tray is opened pressing play will cause the tray to close and start playback.
Selecting a track with the digits on the remote control will also close the tray and start
playback at the selected track.
(5) Indicator light
Power on indicator LED
(6) Play / Pause
Pressing the play/pause button or the skip wheel (11 & 12 see below instructions) will start
playing the CD. Pressing the button again will toggle between play mode and pause mode.
You can select a new track with the skip buttons, the skip wheel (11 & 12 see below
instructions) or directly with digits during pause mode. This will cause the CD-1 to position