Filter
Top Products
Using your Bluetooth headset with the Logitech wireless hub
To voice chat using MSN
®
Messenger:
1. Connect your headset.
Make sure your Logitech headset is connected, and that you have switched your
computer’s sound to the headset by pressing the headset button. See Get
connected
beginning on page 6 for details.
For other headsets, refer to your headset’s user guide for full details.
2. Start your messenger session.
Launch MSN Messenger and Sign In.
3. Run the Audio Setup Wizard.
Make sure your Logitech headset is working optimally with MSN
®
Messenger by running the MSN
®
Messenger Audio Tuning Wizard. Start
the wizard by selecting Audio Tuning Wizard from the Tools menu, and
follow the instructions on screen.
Please note the following when running the wizard:
• When asked to select the Microphone and Speakers you want
to use, make sure they are set to ‘Bluetooth Audio.’ If they are
not, select this option from the relevant drop-down lists.
• When testing the speakers, if you can’t hear the drum beat, this
may be because your headset has gone into sleep mode. Try
pressing the button on the side of your headset once.
4. Choose a contact.
Select the contact you want to chat with from the list available. The easiest
way to do this is to double-click their name in the Online list, and then click
Start talking in the side bar of the Conversation window.
You can also select a contact to chat to by:
• Right-clicking on their name in the Online list and selecting
Start a Voice Conversation.
• Highlighting their name in the Online list and selecting Start a
Voice Conversation from the Actions drop-down menu.
A message is sent to your contact inviting them to chat to you. Sit back and
wait for their reply! If you can’t hear your contact speak or if they can’t hear
you, see Troubleshooting, page 22, for suggestions of the actions you should
take.
© 2003 Logitech, Inc.
17