Squeezebox
™
Duet User Guide 33
If MAC filtering is enabled on the wireless router, the player’s MAC 3.
address should be added to the wireless router’s list of allowed
addresses. The Squeezebox Receiver’s MAC address can be found on
the bottom of the unit.
If you are connecting to the router using an ethernet cable, try the 4.
following:
Try a different ethernet cable.•
Verify that Squeezebox Controller is connecting wirelessly to the •
same network that Squeezebox Receiver is using.
How do I use Static IP addresses with Squeezebox Duet?
If you have set up your network to use static IP addresses, your Squeezebox
Controller will display the message Address Problem – There was a problem
obtaining a DHCP address on your network. Scroll down to Use a static
address and press the center button. On the following screens you can
enter the IP address, subnet mask, gateway address, and DNS server address
information for your network.
My music sounds choppy, distorted, or skips.
There may be excessive interference in your wireless connection, or the
wireless signal may otherwise be too weak. Try moving Squeezebox Receiver
closer to the wireless router, or removing sources of potential interference.
You can also try connecting Squeezebox Receiver directly to the router using
an ethernet cable; if this resolves the problem, then it’s most likely due to
wireless network signal strength or interference.
The Controller’s interface is sluggish, with long delays before
screens appear.
This is likely due to a weak wireless signal. Try moving the Controller closer
to the wireless router, or removing potential sources of interference.
Squeezebox Duet fails to connect to my wireless network.
Check the following:
Check your wireless encryption key. If the key is entered incorrectly, •
Squeezebox Duet will not connect to your wireless network.