Filter
Top Products
LA-122 Universal Antenna Kit
LISTEN TECHNOLOGIES CORPORATION 8535 South 700 West, Suite A Sandy, Utah 84070-2515 USA
Phone: +1.801.233.8992 USA Toll Free: 1.800.330.0891 Fax:+1.801.233.8995 e-mail: info@listentech.com
Dipole Antenna Mounting Options
Mount to an Electrical Box in a Wall
See Diagram B at right
The antenna may be mounted to a single or
dual gang duplex box, or to a square or
hexagonal junction box.
Attach the kit’s Mounting Plate to the electri-
cal box (see photo, right). The cover plate
has a number of holes and slots to
accomodate a wide variety of electrical boxes.
Next, secure the Mounting Bracket to the
plate and connect your antenna as noted in
the following pages.
Mount Directly to a Wall
See Diagram C at right
We recommend using the Mounting Plate to
make for a sturdier installation, however, it is
not necessary to do so. If you use the
Mounting Plate, you will need to provide two
shallow clearance gaps in the wall to allow
for the two protrusions in the Mounting Plate.
Use appropriate anchors to secure the Mount-
ing Plate to the wall (hollow wall anchors are
provided in this kit), then secure the Mount-
ing Bracket to the plate. If you are not using
the Mounting Plate, use appropriate wall an-
chors to mount the Mounting Bracket directly
to the wall.
7
Diagram B. The Electrical Box mount uses the Mounting
Plate and Mounting Bracket as shown above.
Diagram C. A direct Wall Mount should use the Mounting
Plate for added strength, but it is not required for proper
antenna operation.