Filter
Top Products
Connecting the DAB digital output
If you wish to record the DAB signal, connect one of the outputs to a
recording device which accepts a digital audio connection.
Connecting to the mains supply
The unit can be connected to any worldwide mains voltage with no
adjustment. It incorporates Automatic Voltage Selection (AVS) and the
power supply automatically adjusts for the incoming mains supply.
This unit must be earthed. Use the earthed moulded mains lead
supplied. Never use an unearthed plug or adaptor.
Automatic DAB scan
Before you can listen to DAB stations the AKURATE Tuner must
perform a scan of the DAB band (both Band III and L Band). It will
start this process automatically the first time it is brought out of
standby. Therefore, prior to switching the unit on for the first time,
please check that you live in an area where DAB is available and that
your DAB aerial is connected and positioned correctly (see
Connecting the aerials, page 4). When you bring the tuner out of
standby then select the DAB band, the display will indicate whether
the scan is in progress or has completed. You are able to operate the
AKURATE Tuner on the FM and AM bands during the automatic DAB
scan.
If you wish to perform a scan at another time (e.g. if you wish to scan
for new stations), or if you do not have a DAB aerial connected but
add one at a later date and therefore need to perform a scan of the
DAB band, see Rescanning the DAB band, page 14.
To digital
recording device
5AKURATE TUNER
ENGLISH
AKURATE DAB FM/AM tuner-ENGLISH 28/6/07 13:08 Page 13