Linn 242 Speaker System User Manual


 
12
AKURATE Loudspeaker System
Owner’s Manual
AKURATE 221
English
PARAMETER SYMBOL 0 1 2 3 4 5 6 7 8 9
10 50 75 100 115 135 160 190 235
18 22 25 30 34 40
55 85 130
Description and available settings for parameters
Default settings are shown in grey.
* Only for use when the AKURATE 221 speaker is connected to a power amplifier
(see
Connecting
section in this chapter).
** If you are using the AKURATE 221 speaker with a Linn System Controller
or other AV processor, set to 4 (No filtering).
EExxtteerrnnaall hhiigghh ppaassss
ffrreeqquueennccyy**
Increasing the setting
reduces the bass
content sent to the
external speakers.
(Hz)
IInntteerrnnaall hhiigghh ppaassss
ffrreeqquueennccyy
Increasing the setting
raises the lowest
frequency produced
by the unit. (Hz)
IInntteerrnnaall llooww ppaassss
ffrreeqquueennccyy****
Reducing the setting
lowers the highest
frequency produced by
the unit. (Hz)
NO FILTERING
PARAMETER SYMBOL 0 1 2 3 4 5 6 7 8 9
-15 -10 -5 0 +5+10+15
0+1+2+3+4
0+3+6
51020
CCooaarrssee ggaaiinn
Every one step
increase in the setting
raises the gain (volume)
of the speaker by
5 decibels. Every one
step decrease in the
setting lowers the gain
(volume) of the
speaker by
5 decibels. (dB)
FFiinnee ggaaiinn
Every one step
increase in the setting
raises the gain
(volume) of the
loudspeaker by
1 decibel. (dB)
BBaassss eeqquuaalliissaattiioonn
Every one step
increase in the setting
applies an additional
3 dBs at 30 Hz and
below. (dB@30 Hz)
TTiimmee oouutt
Length of time before
unit will go into
standby after audio
input ceases. (mins)
ALWAYS ON