Linn 242 Speaker System User Manual


 
10
AKURATE Loudspeaker System
Owner’s Manual
AKURATE 221
English
FROM LINN SYSTEM CONTROLLER
OR OTHER AV PROCESSOR
HP OUT
AL OUT
A IN
FROM STEREO PRE-AMP
HP OUT
AL OUT
A IN
FROM STEREO PRE-AMP
TO POWER AMPLIFIER
HP OUT
AL OUT
A IN
FROM LINN SYSTEM
CONTROLLER
OR OTHER
AV PROCESSOR
AKURATE 221 - ONE
AKURATE 221 - TWO
HP OUT
AL OUT
A IN
HP OUT
AL OUT
A IN
FROM
STEREO
PRE-AMP
FROM
STEREO
PRE-AMP
AKURATE 221 - ONE
AKURATE 221 - TWO
HP OUT
AL OUT
A IN
HP OUT
AL OUT
A IN
Connecting
Connect the AKURATE 221 speaker to a mains supply using the mains lead
provided.
IMPORTANT:
Do not turn on the mains supply until you have connected all other
components.
Connecting to a Linn System Controller or other
AV processor
Connecting to a stereo pre-amplifier
if used with large (full-range
frequency response) speakers, for example AKURATE 242 or 212 speakers.
Connecting to a stereo pre-amplifier and power amplifier if used
with ‘small’ (limited bass response) speakers.
Note:
In the above configuration the AKURATE 221 speaker is being used to stop
low bass notes from being sent to the main speakers.
Connecting to another AKURATE 221 speaker
OR