Linn 242 Speaker System User Manual


 
Connecting
General
IMPORTANT:
Before making any connections, switch off your power amplifier(s).
Ensure the positive (+) or red coloured connectors from your amplifier(s),
connect to the positive (+) connectors on your loudspeaker(s). And that the
negative (-) or black coloured connectors from your amplifier(s), connect to the
negative (-) connectors on your loudspeaker(s).
AAKKUURRAATTEE 224422 aanndd 222255
The AKURATE 242 and 225 speakers are supplied with several terminal link
strips. These strips can be connected to the terminals on the back of the
speakers to provide a wide variety of amplifier-speaker connection
configurations. The links connect two, three, four or five terminals together
allowing for single-wiring, bi-wiring, tri-wiring, or connection to up to five
separate power amplifier channels. The speakers are supplied from the factory
with the five-hole link strips attached.
AAKKUURRAATTEE 221122
The AKURATE 212 speaker is supplied with several link strips. These strips can
be connected to the terminals on the back of the speaker to provide a wide
variety of amplifier-speaker connection configurations. The links connect two,
three or four terminals together allowing for single-wiring, bi-wiring, tri-wiring
or connection to up to four separate power amplifier channels. The speakers are
supplied from the factory with the four-hole link strips attached.
TToo rreemmoovvee//ffiitt tthhee lliinnkk ssttrriippss::
Carefully remove the blanking plugs that are in the terminals, using a thin
blade.
Use the supplied tool to unscrew the terminal collars.
Remove/fit the required link strips.
Replace all the terminal collars, making sure they are tightly secured.
Replace the blanking plugs.
6
AKURATE Loudspeaker System
Owner’s Manual
AKURATE 242, 225 and 212
English