Filter
Top Products
Description of Features: Chapter 3
AxSys 212 User Manual 31
numbers take bigger steps. The following table shows the equivalent to
each setting of the delay time in milliseconds when using the Mono Delay:
Display mS Display mS Display mS Display mS
0 0017.0 25 0236.8 50 0517.7 75 0889.9
1 0021.9 26 0254.1 51 0528.5 76 0906.0
2 0026.8 27 0271.5 52 0539.3 77 0922.2
3 0031.7 28 0288.8 53 0550.1 78 0938.4
4 0036.6 29 0306.2 54 0560.9 79 0954.6
5 0041.5 30 0323.6 55 0571.7 80 0970.8
6 0046.4 31 0334.4 56 0582.5 81 0986.9
7 0051.3 32 0345.2 57 0593.2 82 1003.1
8 0056.2 33 0355.9 58 0604.0 83 1019.3
9 0061.1 34 0366.7 59 0614.8 84 1035.5
10 0066.0 35 0377.5 60 0625.6 85 1051.7
11 0074.4 36 0388.3 61 0636.4 86 1067.8
12 0082.8 37 0399.1 62 0647.2 87 1084.0
13 0091.2 38 0409.9 63 0663.3 88 1100.2
14 0099.6 39 0420.6 64 0679.5 89 1116.4
15 0108.0 40 0431.4 65 0695.7 90 1132.6
16 0116.4 41 0442.2 66 0711.9 91 1146.5
17 0124.8 42 0453.0 67 0728.1 92 1160.4
18 0133.2 43 0463.8 68 0744.2 93 1174.4
19 0141.6 44 0474.6 69 0760.4 94 1188.4
20 0150.0 45 0485.4 70 0776.6 95 1202.3
21 0167.3 46 0496.2 71 0792.8 96 1216.3
22 0184.7 47 0507.0 72 0809.0 97 1230.2
23 0202.1 48 0517.7 73 0825.1 98 1244.2
24 0219.4 49 0528.5 74 0841.3 99 1258.1
Note: When using the Stereo Delay, all delay times are halved. Example: If
the
MAIN DELAY TIME parameter is set to 62 while using the Stereo Delay,
the delay time would actually be 0323.6 mS.
Tap Tempo
An alternative way to adjust the MAIN DELAY TIME parameter is by
repeatedly pressing the
TAP TEMPO button (which also happens to be the
TUNER button). The AxSys will gauge the time between each press and
immediately set the
MAIN DELAY TIME parameter to the equivalent value,
and show this value in the display.
The TUNER button will only function as a TAP TEMPO button while you are
editing the Delay parameters (i.e., the Delay Edit Row is selected). Otherwise,
pressing this button will select Tuner mode.
Delay Time Offset
The
DELAY TIME OFFSET parameter (00 - 99) provides a different function
depending on the selected Delay Type: