Filter
Top Products
Description of Features: Chapter 3
AxSys 212 User Manual 25
The following parameters are available for modulating:
Display Parameter Display Parameter Display Parameter
5-0 Preamp Bass 5-8 Presence 516 Reverb Decay
5-1 Preamp Middle 5-9 Tremolo Speed 517 Reverb Level
5-2 Preamp Treble 510 Tremolo Depth 518 Drive
5-3 EQ 80Hz 511 Delay Feedback 519 Bass
5-4 EQ 240Hz 512 Delay Level 520 Mid
5-5 EQ 750Hz 513 Chorus Speed 521 Treble
5-6 EQ 2200Hz 514 Chorus Feedback 522 Gain
5-7 EQ 6600Hz 515 Chorus Level 523 Delay/Reverb
As you scroll through the available parameters, a pair of LEDs (one in the
Edit Row column, the other above the Control Knobs) will flash to indicate
the selected parameterÕs location in the parameter matrix.
When using Wah type 5 (Mod Assign) it is important that you set the parameter
being modulated to its minimum, or 00 setting. This is because PEDAL 2 will only
provide positive modulation. This means the current setting of the modulated
parameter is the ÒbaselineÓ or starting point of modulation (i.e. when the pedal is
all the way heel down).The
WAH DEPTH will determine what the maximum of the
modulated parameter will be when the pedal is all the way forward (toe down).
P
a
r
a
m
e
t
e
r
V
a
l
u
e
99
00
Pedal Position
Down Up
When the modulated parameterÕs
setting is at its minimum or 00 value, and
the
WAH DEPTH
parameter is set to 50,
Pedal 2Õs control over its effect is limited.
P
a
r
a
m
e
t
e
r
V
a
l
u
e
99
00
Pedal Position
Down Up
When the modulated parameterÕs
setting is at its minimum or 00 value, and
the
WAH DEPTH
parameter is set to 99,
Pedal 2 takes full control over its effect.
P
a
r
a
m
e
t
e
r
V
a
l
u
e
99
00
Pedal Position
Down Up
When the modulated parameterÕs setting
is at its halfway or 50 value, and the
WAH
DEPTH
parameter is set to 99, Pedal 2Õs
range goes from 50 to 99. However, it
reaches 99 when the Pedal is at its mid-
way point; this means the Pedal has no
effect from mid-wa
y
to toe-down.
P
a
r
a
m
e
t
e
r
V
a
l
u
e
99
00
Pedal Position
Down Up
When the modulated parameterÕs
setting is at its halfway or 50 value, and
the
WAH DEPTH
parameter is set to 50,
Pedal 2Õs range goes from 50 to 99.
(Heel) (Toe) (Heel) (Toe)
(Heel) (Toe) (Heel) (Toe)
P
a
r
a
m
e
t
e
r
V
a
l
u
e
99
00
Pedal Position
Down Up
When the modulated parameterÕs
setting is at its maximum or 99 value,
Pedal 2 will have no control over its
effect, regardless of the
WAH DEPTH
parameterÕs setting.
(Heel) (Toe)