LightSpeed Technologies 850IR Stereo System User Manual


 
850iR User Manual
850iR User Manual | 28
OUTPUT TO PERSONAL FM TRANSMITTER
SPEAKER OUTPUTS
250 400
700
1K 1K4
2K5
4K
6K
+10
0
-10
OFF
OFF
OFF
OFF
ON
ON ON
ON
VOL.
ADJ.
ALD OUT
AUX OUT
VOL.
ADJ.
COMPUTER
AUDIO INPUTS
TV/VCR CD/DVD
800iX
INPUT
PA GING INPUT
ADJ
DC POWER CHARGERS
24VDC
L L R R
SENSOR INPUTS
SENSOR
SHORT
1 2 3
4
SPEAKER OUTPUTS
250 400
700
1K 1K4
2K5
4K
6K
+10
0
-10
OFF
OFF
OFF
OFF
ON
ON ON
ON
VOL.
ADJ.
ALD OUT
AUX OUT
VOL.
ADJ.
COMPUTER
AUDIO INPUTS
TV/VCR CD/DVD
800iX
INPUT
PAGING INPUT
ADJ
DC POWER CHARGERS
24VDC
L L R R
SENSOR INPUTS
SENSOR
SHORT
1 2 3
4
2. Determine the size and type of audio input
jack on the device as many manufacturers’
products differ in connector size and
shape. The Lightspeed LES-370 Personal
FM System requires a 3.5 mm to 3.5 mm
patch cable (part# CA-MMC3535, not included).
5. With the 850iR and ALD turned on, speak into the
REDMIKE and slowly adjust the corresponding “ADJ”
volume control until the appropriate audio level is
attained in the ALD’s receiver headphones.
1. Turn the ALD (Assistive Listening Device) volume control on the back panel all
the way down (fully counterclockwise).
3. Connect a patch cable from the ALD’s microphone
jack or AUX input to the 3.5 mm audio jack labeled
“ALD OUT” on the back of the 850iR.
4. Adjust the volume control on the ALD’s receiver
to maximum output. NOTE! This is to set the
maximum allowable signal from the 850iR.
SPEAKER OUTPUTS
250 400
700
1K 1K4
2K5
4K
6K
+10
0
-10
OFF
OFF
OFF
OFF
ON
ON ON
ON
VOL.
ADJ.
ALD OUT
AUX OUT
VOL.
ADJ.
COMPUTER
AUDIO INPUTS
TV/VCR CD/DVD
800iX
INPUT
PAGING INPUT
ADJ
DC POWER CHARGERS
24VDC
L L R R
SENSOR INPUTS
SENSOR
SHORT
1 2 3
4