Filter
Top Products
3 Operating
Operating 19
Operating
3
Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION.
3. Select a file you want to play by pressing
C
or
V
.
To Do this
Stop Press
Z
.
Playback Press
d/M
.
Pause
During playback, press
d/M
.
Skip to the next/
previous le
During playback, press
C
or
V
to go to the next le
or to return to the beginning
of the current le.
Press
C
twice briey to
step back to the previous le.
Search for a
section within a
le
Press and hold
C/V
during playback and release it
at the point you want to listen
to.
Play repeatedly
or randomly
Press REPEAT on the remote
control repeatedly, the
display will be changed in the
following order, RPT 1
RPT
D (DIRECTORY) RPT ALL
RANDOM OFF.
Select a le
directly
Press 0 to 9 numerical buttons
on the remote control to go
to the desired le directly.
Resume
playback
The unit memorizes the point at
which you've changed function
or the unit had been turned o.
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
,
Note
Other operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use
C/V
to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300ms.