Filter
Top Products
Operating 25
Operating
3
Dubbing USB to USB
You can do dubbing a various sound source in
USB1 to USB2 on USB function.
1. Connect a USB device including desired sound
les to USB1.
2. Connect an USB device to USB2.
3. Press REC TO USB 2 on the unit or
X
REC on
the remote control.
4. To stop recording, press
I
on the unit or
Z
ENTER on the remote control.
You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/ WMA
CD Only)
During recording MP3/ WMA, there is no
sound.
When you stop recording during playback,
the le that has been recorded at that time
will be stored. (AUDIO CD Only)
Do not remove the USB device or turn
o the unit during USB recording. If not,
an incomplete le may be made and not
deleted on PC.
If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
Multi card reader device or External HDD
can not be used for USB recording.
A le is recorded by about 512 Mbyte when
you record for a long term.
When you stop recording during playback,
the le will not be stored.
You may not store more than 999 les.
It’ll be stored as follows.
AUDIO CD MP3/ WMA
The other
source*
* : TUNER, AUX and the like.
,
Note
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal o ense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights