Filter
Top Products
Operating24
Operating
3
Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external device. (Refer to
the page 14)
1. Connect the portable player to the
PORT. IN (PORTABLE IN) connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing
1
/
!
.
3. Select the PORTABLE or AUX function by
pressing FUNCTION on the remote control or
AUX/ iPod/ PORT. IN on the unit.
4. Turn the portable player or external device and
start it playing.
Changing the lighting effect
You can change the unit’s lighting e ects by
pressing LIGHTING on the remote control or
LIGHTING EFFECT on the unit in 5 types. (Forward
Level Mode/ Peak Level Mode/ Center Level Mode/
Reverse Level Mode/ Shower Level Mode)
Changing the woofer lighting
You can change the woofer’s lighting e ects in
5 types by pressing SUBWOOFER - LIGHTING/
DEMO. (Default On LED/ Level Meter LED/ Sound
Detect LED/ Level Reverse LED/ Always On LED)
On/ off the woofer power
You can power on or o the woofer by pressing
WOOFER POWER on the remote control.
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a function in which you want to record
by using CD/USB, TUNER on the unit or
FUNCTION on the remote control.
One track recording - You can record to USB
after playing a le you want.
All tracks recording - You can recording to USB
after stop.
Program list recording - After showing the
programmed list, you can record it to USB.
3. Press REC TO USB 2 on the unit or
X
REC on
the remote control.
- If you connect both of USB1 and USB2, press
>ıı to record to USB1 and press
I
to record to
USB2.
4. To stop recording, press
I
on the unit or
Z
ENTER on the remote control.
To select recording bit rate
and speed
1. Press REC TO USB 2 on the unit or
X
REC on
the remote control for longer than 3 seconds.
2. Press to select a bit rate;
- On the remote control:
C
/
V
- On the unit:
Y
/
U
3. Press REC TO USB 2 on the unit or
X
REC on
the remote control again to select the recording
speed.
4. Press to select a desired recording speed; (Only
AUDIO CD)
- On the remote control:
C
/
V
- On the unit:
Y
/
U
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music le.
5. Press REC TO USB 2 on the unit or
X
REC on
the remote control to nish the setting.