Filter
Top Products
Microboards CopyWriter Live
7
Connections
Important Note
: Make sure the power is turned off to the CopyWriter Live system when
connecting or disconnecting any cables.
Back Panel: XLR, RCA Output, RCA Input 1, and Power
Input connections can be made to the XLR connection on the back, or to the RCA Input 1
connection. The power connection is also on the back.
Audio monitoring can be done either from the Headphone jack on the front of the CopyWriter Live,
or from the Output RCA jacks on the back.
Front Panel: MIC, Input 2, and Headphones
Plug a microphone into the 1 ¼ inch input port on the front of the CopyWriter Live. Left/Right
RCA Input 2 is available as an input source on the front panel.
The Headphone jack can be used to monitor the audio either during recording or playback. It is
recommended that you set the headphone volume at a comfortable level before changing the input
volumes during recording.
XLR Connection
to External
Source
RCA Input 1 to Tape
or CD Player
(Left & Right)
Left/Right RCA Output
to Audio Receiver
Headphone
Jack
Left/Right RCA Input 2
Power Connection, 100-
240V AC (Auto Detect)