Filter
Top Products
IB-CD1493(AD-63D)-WM-E-12030310
PLAYING CD TRACKS IN PROGRAMMED OR
RANDOM ORDER
1. Programmed Play
You can make a program of up to 16
tracks in the order you want them to be
played.
1. Slide the FUNCTION switch to CD position. Make
sure the CD is stopped.
2. Press the PROG. button. The letter “ ”
will show and the PLAY/PROG. lamp will flash.
3. Press or to select the tracks you want to
program in the order you want.
4. Press the PROG. button to confirm. The letter
“ ” will show and the PROG. lamp will flash.
5. Repeat above steps 3 and 4. You can program up
to 16 tracks (the display will show “ ”, “ ” …
“ ” for program number 11 to 16).
6. Press to start programmed play. The PLAY/
PROG. lamp will flash.
NOTE:
1. Programming can only be done in STOP mode.
2. The programmed memory will be lost if the power is shut off or the CD door
is opened.
To cancel the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button, then slide the FUNCTION switch to TAPE position.
2. Random Play
To play the songs in random order
Press the RANDOM button in STOP mode or during playing, the set will play all
of the songs in random order. The floating symbol “ ”
and the current track number will show in turn on the display.
To resume normal play
Press the RANDOM button again, the player will start playing normally.