Filter
Top Products
AO-BTHD USER MANUAL
7
B: PAIRING AO-BTHD WITH IPAD /IPHONE
• Please keep the headset and iPhone/iPad® within a range of 1 meter of each other
whilst pairing.
• Activate the headset pairing mode (hold the MFB (middle button) for 6 seconds - the
red and blue LED will blink alternately)
• In the iPhone/iPad home screen, select settings，then general，then Bluetooth
• Swipe the on/off switch to on The message Now Discoverable will appear
• The Headset should be identified by your iPhone/iPad. Select it to complete the
pairing
C: PAIRING AO-BTHD WITH PC/NOTEBOOK OR TABLET
Before installing this product, please make sure your PC or device supports Bluetooth, that the
Bluetooth feature is enabled or that the Bluetooth dongle has been installed correctly
• Open the Bluetooth program of your PC or device and keep the AO-BTHD and PC
within 1 meter of each other whist pairing.
• Activate the headset pairing mode: hold the MFB (middle button) for 6 seconds - the
red and blue LED will blink alternately
• Activate Bluetooth connectivity on your PC and begin the SEARCH NEW DEVICE
function.
• After a short scanning period, your PC or Device will indicate that your AO-BTHD
headset has been discovered and is ready for connection/pairing
• If you are prompted to enter a pin-code, use the code 0000 (four zero’s)
• The connection should then be complete and the headset will be ready for use
Note: If the above pairing process has failed, please ensure your Bluetooth receiver or software
has been installed correctly and then repeat the above steps.
Once paired and recognized by your PC/notebook, you can use the headset for chat
functions such as Skype® or MSN®.