Filter
Top Products
OPERATION
REMOTE CONTROL FUNCTIONS
The KSA-100S/200S/300S are the first high performance amplifiers to
utilize remote control functions. The amplifiers can be switched on or offand
the meter function can be changed from your listening position via the hand-
held remote control.
The KSA remote control duplicates the front panel switches on the amplifi-
ers. The Power button will turn the amplifier on and off, while the Meter
button will choose between a full bias meter display or no bias LED
illumination.
When the amplifier is switched On, the Blue POWER LED and Bias Level
Meter display will illuminate. When the amplifier is switched Off, no LEDs
will be illuminated.
When the Bias Level Meter is turned off, no LEDs will be visible except for
the blue pilot LED. When the Bias Meter display is on, the bias level will be
displayed with the appropriate LEDs.
BATTERY INSTALLATION
NOTE: Batteries should be replaced when the KSA functions from the remote
control become intermittent.
1. Remove the four hex head screws from the back of the remote control.
2. Remove the back plate to expose the battery storage compartment.
3. Replace batteries (Refer to the polarity drawing while inserting the
batteries)
4. Replace the back plate and insert the four hex head screws.
PAGE 17