Filter
Top Products
access tracks numbered 10 or higher. The
+10 key selects a track in increments of 10.
EXAMPLE: To access track 8, press the
number 8 key once. To access track 10,
press the +10 key once and the 0 key
once. To access track 24, press the + 10 key
twice and press the 4 key once.
24 Display (remote control only)
Use this key to cycle the display window (1)
between elapsed time of the track currently
playing, time remaining in the current track,
and total remaining time of the disc or pro-
gram. Press the CD key on the remote con-
trol, then press the mode key until the
desired information appears in the display
window.
25 Dim (remote control only)
Use this key to turn the display window (1)
on and off. Press the CD key on the remote
control, then press the dim key until the dis-
play window reaches the desired position.
TRACK PROGRAMMING
26 Prog (remote control only)
Use this key to select the tracks you would
like to hear, in the order in which .you would
like to hear them. This method of program-
ming is short term and will be cleared when
you press the stop key (15) twice. A maxi-
mum of twenty tracks may be stored in a
program sequence.
27 Clr (Clear) (remote control only)
Use this key to delete the last entry select-
ed in a programmed sequence. Track for-
ward, track back, repeat, and pause function
normally within a programmed sequence.
Note
Track forward, track back, repeat, and
pause function normally within a pro-
grammed sequence.
HOW TO WRITE A PROGRAM
1.
Press the program key (26)
theKAV-300cd remote control. PRO-
GRAM will appear in the display window
(1).
Key in the desired track sequence using
the numeric keypad (23). The number
tracks and total playing time of the pro-
grammed sequence will appear in the
display window (1). Track numbers will
appear in the display as they are stored
within a programmed sequence.
Press the play key (14) to begin playback
of the programmed sequence.
Press the stop key (15) once to stop
playback (but not erase program). Press
stop twice to erase a programmed
sequence.
Note
When the CD is in stand-by mode the pro-
grammed sequence is erased.
=
=
=
HOW TO PROGRAM USING
TRACK FORWARD AND BACK
1. Press the program key (26) on the
KAV-300cd remote control. PROGRAM
will appear in the display window (1).
2.
Press the track forward key (17)
select a track. Key in the desired track
sequence using the numeric keypad (23).
The number of tracks and total playing
time of the programmed sequence will
appear in the display window (1).Track
numbers will appear in the display as
they are stored within a programmed
sequence.
EXAMPLE: Press track forward two times
to get back to track 2.
KRELL KAV-300cd Page 9 of 16