Filter
Top Products
Front Panel and Remote
Control Operation
The KAV-300cd remote control provides
complete CD transport functions as well as
Krell preamplifier and power amplifier
remote functions. A description of the keys
and their functions is provided below.
Note
Not all keys on the remote control function
with the KAV-3OOcd. Press the CD key on
the remote to access CD commands.
13 Open
Press once to open the drawer. Insert a CD,
label side up, into the drawer. Press open
again. After a momentary pause (while the
CD’s contents are being scanned), the total
number of tracks and the total playing time
appear in the display window (1).
14 Play
To activate playback from the beginning of
the CD, press play after inserting the CD
into the drawer. The drawer will close and
playback will begin from the first track. If the
CD is loaded and the disc contents have
been scanned, press play on the front panel
(5) or remote control. The disc will start play-
ing from track 1 or the beginning of a pro-
grammed track sequence. When an HDCD
~
encoded CD is played, the HDCD
~
LED (3)
illuminates, indicating that HDCD
~
decoding
is functioning.
15 Stop ....
Terminates CD playback.
16 I~: Track Back
Press once to select and begin playing the
track that precedes the current track.
17 H: Track Forward
Press once to select and begin playing the
track that follows the current track.
1 Krell is the registered trademark of Krell Industries, Inc.
18 << Search Back (remote control only)
Press and hold this key to scroll backward
through the current track.
19 ~ Search Forward
(remote control only)
Press and hold this key to scroll forward
through the current track.
20 Pause
Press once to temporarily suspend playing
the current track. To resume playing the
track at the point pause was engaged,
press pause again or press play.
21 Rep (Repeat) (remote control only)
Press once to repeat the entire disc or track
program continuously. Press twice to repeat
the current track continuously. Press again to
cancel this function. When selecting the
desired repeat function, press the repeat key
once and REPEAT will appear in the display
window (1). Press repeat twice and REPEAT
and SINGLE will appear in the display win-
dow.
22 AJB (remote control only)
Use this key to create a loop between two
pre-determined points within a single track
or sequential tracks. To create an NB loop,
start play of a track. When you hear the part
that you want as the beginning of the loop,
press A/B to insert the start position. Press
A/B again to insert the finish position. NB
will automatically begin and continue indef-
initely. To delete the A/B program, press A/B
again or press the stop key (15).
23 Direct Number Access Keypad
(remote control only)
The direct number access keypad makes
track selection quick and easy. When using
the direct track access function, the selected
track will begin play immediately after it is
selected. If the track you want to play is
numbered 1-9, press the key that corre-
sponds to the track. Use the +10 key to
Page 8 of 16 KRELL KAV-300cd