Filter
Top Products
16 Krell KAV–280p
Pin 1 Shield (ground)
Pin 2 Non-inverting (hot) (0°)
Pin 3 Inverting (cold) (180°)
RC-5 IN
This input accepts baseband RC-5 input commands. It facilitates
custom installations by allowing the KAV–280p to be controlled via
hard-wired signals from various remote devices.
12 VDC REMOTE POWER IN / OUT
The input accepts 12 Volt power on/off signals from other Krell
components and the output sends 12 volt power on/off signals to
other Krell components, as well as to other devices that incorpo-
rate a 12-Volt power on/off trigger input.
This feature allows enables the remote turn on/off of other compo-
nents when the KAV–280p is powered on/off.
Consult the owner’s reference of any device used in a custom installation
to take full advantage of the remote capability of the KAV–280p.
Connecting the KAV–280p to Your System
continued
Pin assignments for the
XLR connectors
Additional
Connections
Note