Filter
Top Products
This pr
oduct is manufactur
ed in the United States of America. Kr
ell
®
is a r
egister
ed trademark of Kr
ell
Industries, Inc., and is r
estricted for use by Kr
ell Industries, Inc., its subsidiaries, and authorized agents.
CAST™, Evolution CAST™, and Theater Thr
oughput™ ar
e trademarks of Kr
ell Industries, Inc. All other
trademarks and trade names ar
e r
egister
ed to their r
espective companies.
© 2006 by Kr
ell Industries, Inc. All rights r
eser
ved P/N 309094-W
FBI
Fully Balanced Integrated Amplifier
Instructions for Use
v
06.0
CONTACT
INFORMATION
This product complies with the
EMC directive (89/336/EEC)
and the low-voltage directive
(73/23/EEC).
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-298-4000
FAX 203-891-2028
E-MAIL krell@krellonline.com
WEBSITE http://www.krellonline.com
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
8. Unplug this apparatus during lightning storms or when unused for long
periods of time.
9. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
10. The FBI must be placed on a fir
m, level surface where it is not exposed
to dripping or splashing.
11. The ventilation grids on the top and bottom of the FBI must be unob-
structed at all times during operation. Do not place flammable material
above or beneath the pr
eamplifier
.
12. Before making connections to the FBI, ensure that the power is off and
other components are in mute or stand-by mode. Make sure all cable ter-
minations are of the highest quality, free from frayed ends, short circuits, or
cold solder joints.
13. THERE ARE NO USER SER
VICEABLE PARTS INSIDE A FULLY BAL-
ANCED INTEGRA
TED AMPLIFIER.
Please contact Krell if you have questions not addressed in this guide.