Filter
Top Products
11
Unpacking and Placement
This section describes the procedures for safely unpacking and placing your
Evolution 505 SACD/CD Player. The Evolution 505 is shipped in 1 carton consist-
ing of the SACD/CD Player and an accessory box.
Opening the Evolution 505 Shipping Carton
The Evolution 505 shipping carton measures 22 in. (55.9 cm) wide by 12 in. (30.5
cm) high by 22 in. (55.9 cm) deep.
Evolution 505 Chassis. This measures 17.3 in. (43.8 cm) wide by 6 in. (15.3 cm)
high by 17.3 in. (43.8 cm) deep, and weighs 29 lbs. (13.2 kg).
To Remove the Evolution 505 from the Shipping Carton
1. Open the shipping carton and open the top flaps. The carton contains these
items:
1 Evolution 505 SACD Player
1 Accessory box containing the following:
1 IEC Connector (AC Power) cord
1 12 VDC (12 V trigger) cable
1 Remote control
2 AAA-size 1.5 Volt batteries for the remote
1 T-10 Torx wrench for the remote control
1 Packet containing the Quick Setup Guide and the Warranty
Registration Card
2. Remove the accessory box and place to one side.
3. Lift out the removable front piece of foam.
4. Carefully lift out the Evolution 505 SACD/CD Player. It is quite heavy, so get a
firm grip on it before lifting, or ask a friend to help.
5. Place the Evolution 505 in a safe location, and remove the protective plastic
wrapping.
Notes
If any of these items are not included in the shipping box, please contact your authorized
Krell dealer, distributor, or Krell for assistance.
Save all packing materials. If you ship your Evolution 505 in the future, repack the unit in its
original packaging to prevent transit damage. See Return Authorization Procedure, on page
30, for more information.
SECTIONTWO
continued