Filter
Top Products
KRAMER ELECTRONICS LTD.
6
6.3 Getting to Know the TP-2xl Video Line Receiver
The Kramer
TP-2
xl is a high performance composite video to twisted pair receiver, designed to receive video signals
over long distances using common twisted pair cable. Combined with the
TP-1
xl this set of machines is an upgrade of
the TP-1N/TP-2N pair (now discontinued). Using good quality cable, the system can maintain the bandwidth of an
industrial color video signal up to 4000 ft. (1.3km) vs. 1000ft of the old version, and broadcast quality (up to 12 MHz)
for as much as 750 ft. (250 meters.) At shorter distances, bandwidth of 100 MHz is easily achieved. The set provides
gain and high frequency compensation controls to optimize levels in extremely long runs. Kramer twisted pair
adapters solve remote monitoring requirements without using more costly fiber or wireless transmission systems.
Using the
RK-50R
kit, a set of
TP-1
xl/
TP-2
xl can be mounted in a standard 19” rack.
NOTE
For Installation, operation, maintenance and troubleshooting instructions please refer to sections 8-13.
Figure
: TP-2xl Front/Rear Panel Features
Table 2: TP-2xl Front/Rear Panel Features
No.
Feature Function
1. Illuminated power switch Supplies power to the unit.
2.
CV out
BNC connector Amplified and buffered video output.
3.
GAIN
trimmer Controls video level of output.
4.
HF
trimmer Controls cable equalization of the video output.
5.
LINE in
terminal block Balanced input.
6.
“Term” Switch
Pressed to “ Term” position when the machine is the last on the line and not
looped.
7. Power Connector
A 3-prong AC connector allows power to be supplied to the unit. Directly
underneath this connector, a fuse holder houses the appropriate fuse.