Korg TMR-50 Stereo Receiver User Manual


  Open as PDF
of 168
 
38
indicators of the tuning guide will blink
sequentially in red.
Blinking red
When the formatting procedure is
complete, the power is turned o.
Formatting while using USB power
1. Turn o the power to the TMR-50.
2. Press and hold down the A-B/DELETE
buon and the REC buon while using
a USB cable to connect the TMR-50 to
a computer.
3.
Follow the same procedure as that for
formaing while using the baeries.
Page 37 “Formatting while using
baeries”
4.
When the formatting procedure is
complete, a screen instructing you to
disconnect the unit from the computer
will appear on the display.
Page 35 “Disconnecting the TMR-50 from
the computer”
5.
Disconnect the TMR-50 from the computer.
Troubleshooting
Power does not turn on.
•
Could the battery symbol be blinking?
Replace the batteries. Recording is not
possible if the baery symbol is blinking.
• Make sure the baeries are inserted with
the polarities (+, -) in the correct orientation.
 previous next