Korg TMR-50 Stereo Receiver User Manual


 
31
will start when precount “–1” (1 beat
before) is displayed.
The metronome sound from the speaker
will stop shortly before recording will start.
To hear the metronome while recording, use
headphones connected to the PHONES jack.
Playing back the tempo-synchronized track
1.
With the recorder stopped, press the
buon or the buon, and then
select the tempo-synchronized track to
play back.
When a tempo-synchronized track is
selected, the tempo-synchronized track
icon will appear on the display.
The tempo and beat will be set to the tempo
and beat values that are stored as track data.
Note: The tempo and beat seings will
not change if you select a track that is not
tempo-synchronized.
After selecting a tempo-synchronized
track, you can use the TEMPO UP/DOWN
buons, the TAP buon, and the BEAT UP/
DOWN buons to change the tempo or
beat seings. If you want to return these
seings to the values that are stored as
track data, temporarily select a dierent
track number, and then re-select the tempo-
synchronized track.
2.
Press the PLAY/STOP buon to play back
the tempo-synchronized track.
Playback will start 1 beat aer the buon
is pressed. “0:00” will continue to blink
on the time indicator of the display until
playback starts.
When playback of the tempo-synchronized
track starts, the metronome pendulum will
swing. In addition, the TAP TEMPO buon
will blink in time with the tempo.