Filter
Top Products
6
7
Perform all audio connections with the Tiger’s AC cord unplugged.
Ampli er to Satellites
Use the speaker cables supplied with your Tiger system to connect the
satellites to the ampli er unit. Notice that one cable is longer than the other
to accommodate asymmetrical component placement (where one satellite is
closer to the ampli er than the other).
If necessary, you can purchase extension speaker cables pre-wired with male
and female RCA phono connectors at most electronics supply stores, such as
Radio Shack. Do not use shielded cables for this purpose as they may adversely
a ect audio performance.
Ampli er to Woofer
Use the at woofer cable supplied
with your Tiger system to connect the
woofer unit to the ampli er unit. The
connectors snap into place easily when
properly oriented. Do not force them.
Connections
Woofer Rear Panel