Filter
Top Products
Phase Switch 0/180 (Fig.5)
This control is used to acoustically
match the subwoofer’s output to your
main speakers. You want to select one
of the two positions, either 0 or 108,
in which your sub has more output at
your listening position.
You’re done! Enjoy your new Klipsch
ProMedia SWS subwoofer.
Power Switch Options (Fig.5)
On the SWS subwoofer’s back panel is
a power switch with three positions:
OFF, ON, and AUTO-ON. If you select
AUTO-ON, the SWS will turn itself on
when it detects an audio signal at one
of its inputs and off after a period has
elapsed with no input signal. You
probably will want to leave the switch
set to AUTO-ON most of the time.
Crossover-Frequency and
Level Adjustment (Fig.5)
On the back of SWS is a switch
labeled FREQUENCY, which adjusts
the crossover frequency between 60
and 90 Hz. Only signals below the
selected frequency will be reproduced
by the SWS. You will need to adjust
the FREQUENCY control and the SWS
volume control to achieve a pleasing
balance of bass to higher sounds.
S W S
P ro M e d i a
®
Subwoofer System