Filter
Top Products
interface with A/V Control systems that can utilize a USB hookup.
Please contact your authorized Klipsch dealer or Klipsch Technical
support for more information.
“MIC IN” – Plug the supplied microphone into this jack when
using the “ROOM CORRECTION” feature during setup. It is rec-
ommended that the microphone be disconnected and stored in a
remote location during normal use to avoid damage from loud
playback levels.
“LINE OUT” – This pair of connections can be used as an alter-
nate connection point for a second subwoofer. Be aware that the
signal output from these jacks is effected by the “Volume”,“EQ”,
“Lowpass”, “Lowpass Slope”,“Phase” and “Room Correction”
settings of your RT subwoofer. The advantage of this is the ability
of the RT subwoofers Adaptive Room Correction function to
correct the response the second subwoofer, resulting in a more
accurate response. If the secondary subwoofer is connected
directly to your system, the RT subwoofer’s room correction will
react to rather than control the response of the other subwoofer.
As a result we recommend the following procedure when
connecting a second subwoofer to these outputs.
• Play a signal, such as one of the RT subwoofer’s two demo
tracks, and set the volume control of the 2nd subwoofer to
approximately match that of the RT subwoofer.
• Defeat the secondary subwoofer’s low pass setting by
selecting the “Bypass” or “LFE” mode or set the low pass
control to its highest frequency if these options are not
present.
• Set the secondary subwoofer’s phase control to 0°
• Run the “Room Correction” function on the RT subwoofer
• As with the initial setup of your RT subwoofer, listen to a track
with a repeating bass line in your listening position. Experiment
with alternate phase settings on the secondary sub while
repeating this track. If one of these alternate settings yields an
increased amount of bass, choose that setting and run the RT
subwoofer’s room correction function again.
• Please note that if either the volume or phase settings on the
secondary sub are changed after running the Adaptive Room
Correction™ function you will have to run the RT subwoofer’s
room correction again to compensate.
CARE AND CLEANING OF YOUR POWERED SUBWOOFER
Your subwoofer has a sealed, wood veneer finish that should only
require dry dusting or cleaning with a dry cloth.Avoid the use of
abrasive or solvent-based cleaners and harsh detergents. The
brush attachment of your vacuum should remove any dust from
your subwoofer enclosure and grille.
WARRANTY — U.S. AND CANADA ONLY
The Warranty below is valid only for sales to consumers in the United
States or Canada. KLIPSCH, L.L.C. ("KLIPSCH") warrants this product
to be free from defects in materials and workmanship (subject to
the terms set forth below) for a period of five (5) years from the date
of purchase. During the Warranty period, KLIPSCH will repair or
replace (at KLIPSCH’s option) this product or any defective parts
(excluding electronics and amplifiers). For products that have
electronics or amplifiers, the Warranty on those parts is for a period
of two (2) years from the date of purchase.
To obtain Warranty
service, please contact the KLIPSCH authorized dealer from which you
purchased this product. Proof of purchase in the form of a bill of sale
or receipted invoice, which is evidence that this product is within the
Warranty period, must be presented or included to obtain Warranty
service.
This Warranty is invalid if (a) the factory-applied serial number has
been altered or removed from this product or (b) this product was
not purchased from a KLIPSCH authorized dealer.You may call
1-800-KLIPSCH to confirm that you have an unaltered serial number
and/or you purchased from a KLIPSCH authorized dealer.
This Warranty is only valid for the original purchaser and will
automatically terminate prior to expiration if this product is sold or
otherwise transferred to another party.
This Warranty does not cover cosmetic damage or damage due to
misuse, abuse, negligence, acts of God, accident, commercial use or
modification of, or to any part of, the product.This Warranty does not
cover damage due to improper operation, maintenance or
installation, or attempted repair by anyone other than KLIPSCH or
a KLIPSCH dealer which is authorized to do KLIPSCH warranty work.
Any unauthorized repairs will void this Warranty.This Warranty does
not cover product sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS
WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER.
`KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT
PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU
OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES
WHATSOEVER, INCLUDING BUT NOT LIMITED TO,THE WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or implied warranties so the above
exclusions may not apply to you. This Warranty gives you specific
legal rights, and you may have other rights, which vary from state
to state.