Filter
Top Products
Page 6
Caution: Turn off your preamplifier/receiver and your subwoofer before making any connections!
Inputs and Outputs
Line In
Your Palladium Series powered sub-
woofer is connected via line-level
connections only. RCA-type and XLR
inputs are provided and either may
be used. Do not connect both at
the same time. Use the “Subwoofer”,
“LFE” or “Pre-amp” outputs of your
system’s electronics to connect to
the “LINE IN” input connections of
your subwoofer. Use high-quality,
shielded, line-level cables for these
connections.
Line Out
This jack can be used as an alternate
method of connecting a second
subwoofer to your system. This
second subwoofer can function as
a “slave” to the primary subwoofer.
(For more on this, see the “Back Pan-
el Features” section of this manual.)
RCA-type and XLR inputs are pro-
vided and either may be used. Do
not connect both at the same time.
Use high-quality, shielded, line-level
cables for these connections.
Connecting the Subwoofer