Filter
Top Products
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux ap-
pareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
NATIONAL RESTRICTIONS
This device is intended for home and office use in all EU countries (and other
countries following the EU directive 1999/5/EC) without any limitation except for
the countries mentioned below:
Country Restriction Reason/remark
Bulgaria None
General authorization required for outdoor use and
public service
France
Outdoor use limited
to 10 mW e.i.r.p
within the band
2454-2483.5 MHz
Military Radiolocation use. Refarming of the
2.4 GHz band has been ongoing in recent
years to allow current relaxed regulation. Full
implementation planned 2012
Italy None
If used outside of own premises, general
authorization is required
Luxembourg None
General authorization required for network and
service supply (not for spectrum)
Norway Implemented
This subsection does not apply for the
geographical area within a radius of 20 km from
the centre of Ny-Álesund
Russian Federation None Only for indoor applications
Note: Please don’t use the product outdoors in France
THANK YOU
Thank you for your purchase of the Klipsch Gallery
™
G-17 Air! You will soon be
experiencing not only the newest and easiest way to listen to your favorite music
but you will be listening through a system created by a company with a 65 year
reputation for building speakers and music devices that recreate the most lifelike
sound possible. The Klipsch horn-loaded technology used in the G-17 Air is de-
rived from audiophile speakers costing thousands of dollars. The separate horn-
loaded tweeters and woofers are biamplified for the cleanest sound possible.
PRODUCT REGISTRATION
Register your product online at www.klipsch.com/register
•KlipschGroupInc,(KGI)willkeepyouup-to-dateonnewproductsandpromotions
•Yourpersonalinformationwillneverberesold
•Thisregistrationinformationisnotusedforwarrantypurposes
Please retain your receipt for warranty claims
WHAT IT DOES
The Klipsch G-17 Air is designed to play your music:
a. Wirelessly from any device equipped with Apple
®
AirPlay
®
technology,
using your existing Wi-Fi
®
network.
b. Connected via the rear-mounted USB input, most 30 pin iPods
®
,
iPhones
®
or iPads
™
.
c. Connected via the rear-mounted 3.5mm input and to the headphone
output of any MP3 player or phone.
If you have iTunes 10.1 or later on your Mac computer or PC, you can wirelessly
stream any of the music in your library or stream music from the Internet radio
stations accessible to the G-17 Air. You can also wirelessly stream music from
your iPhone, iPad or iPod touch to the G-17 Air (iOS 4.2 or later required in these
devices). The 3.5mm auxiliary input also allows you to play any audio device with a
3.5mm output through the G-17 Air (3.5mm cable not included).
AirPlay requires iTunes 10.1 or later to operate from a MAC or PC. Airplay can
also operate from an iOS device capable of running iOS 4.2 or later (iPhone 3G,
3GS or 4, iPod touch 2nd, 3rd or 4th gen, iPad or iPad 2). However it is recom-
mended that you update your iOS and iTunes to get the most out of your system.
PACKING LIST
1. G-17 Air Main Unit
2. Glass base for G-17 Air with attached feet and post
3. Rubber input cover for post
4. Four Phillips head screws (to attach post to the G-17 Air)
5. Grille
6. Remote control (with battery)
7. Power supply
8. AC power cord (plug into power supply)
9. This owner’s manual
10. Quick AirPlay Setup Guide
11. White Gloves
ATTACHING THE BASE TO THE G-17 AIR
For desktop placement you must first attach the supplied base:
1. Gently remove the rubber input cover (A) on rear of the post attached to the
tempered glass base exposing four screw holes on post (B).
2. Align screw holes on rear of the G-17 main unit with those on the post.
3. Using the four screws, attach G-17 Air to the post. Do not over tighten.
4. Replace rubber input cover.
MOUNTING THE G-17 AIR ON WALL
1. Determine a suitable location for the G-17 to wall-mount and complete any
wiring to it before mounting to the wall. DO NOT CEILING-MOUNT.
2. With a pencil, mark on wall two pilot hole locations 12 inches (30.48cm)
horizontally apart.
3. Pre-drill pilot holes in marked locations. If drilling into a wall stud (ideal)
it is recommended to use #10 mounting screws (not included) to mount
the G-17 Air. If there is no stud, install wall anchors (not included) into
the pilot holes to hold G-17 Air instead. Wall anchors should be rated to
at least 8 lbs. (3.63 kg)
A
B B
12" (30.48cm)