Filter
Top Products
31
Troubleshooting
This section is designed to help you solve possible problems you might encounter. Common
questions and answers regarding installation and connection are listed below for your
reference. In case these pointers do not solve the problem please contact your dealer or Klegg
Customer Enquiries for further assistance.
Problem Cause Remedy
No Sound Speaker not properly connected
Incorrect input mode
Amplifier is off/malfunction
Speaker defective
Check cables for shorts
or open connections
Select proper audio
source (Digital or
Analog)
Check your amplifier
Refer to speaker
documentation
Weak sound Volume control down
Speaker cable shorted or has
broken strands
Turn up volume control
Check cables
Buzzing sound Speaker cable (wire) shorted
Mains power interference
Defective speaker
Check cable wiring
Check power cable is not
running next to speaker
cables. Connect power
adapter to different wall
socket.
Refer to speaker
documentation
No balance control
Check balance control setting Adjust balance control
Excessive
highs or lows
Speaker out of circuit
Check speaker
connections