Filter
Top Products
11
1. After properly connecting M6 501P to your audio sources and amplifier, plug in M6
501P’s AC adapter to an AC outlet.
2. Activate the M6 501P power by pushing the POWER Button on the front panel. Then, turn
on the power for all audio sources, amplifier, and/or powered subwoofer.
3. Having completed the installation, get ready to experience true Dolby Digital or DTS
surround sound right in your living room.
Note:
When playing music or movies be sure to have the volume set low initially. Gradually turn
the volume up to an appropriate level after the playback has started.
The M6 501P allows precise adjustment of equalizer band settings (see page 28). Since each
speaker system has its own individual properties, you may wish to experiment with these
settings to attain your desired output reproduction. If you are connecting the M6 501P to the
Klegg M6 501R Home Theatre Speaker System, you may wish to start with an EQ Setup as
follows:
?? BAND 1: +8dB
?? BAND: 2 +9dB
?? BAND: 3 +7dB
?? BAND: 4 +8dB
?? BAND: 5 +9dB
These are settings are for general guidance only. The acoustics of your own living room and
desired listening levels will mean your own set up will provide the best results.
EQ Band Settings for the Klegg M6 501R Home Theatre Speaker System