Filter
Top Products
36
SX .4 Series Amplifiers
Specifications
Height: 2.5 inches / 6.35 centimeters
Width: 10 inches / 25.4 centimeters
Length Without EndKaps: Subtract 5 inches (12.7 cm) from chart above
Frequency Response: 20Hz - 20kHz, +0 / -1dB
Input Sensitivity: 62.5mV - 16V
Signal-t0-Noise Ratio: >100dB (DSP Bypass On)
High Pass Crossover Freq.: 10Hz - 16kHz in 1/12 Octave steps
High Pass Crossover Slope: 0 (off) - 36dB in 6dB steps
Low Pass Crossover Freq.: 30Hz - 20kHz in 1/12 Octave steps
Low Pass Crossover Slope: 0 (off) - 36dB in 6dB steps
KickEQ Frequency: 20Hz - 20kHz in 1/12 Octave steps
KickEQ Bandwidth (Q): .5 to 10 in .5 steps
KickEQ Boost/Cut: +/-18dB per Octave
Remote Bass Level Control: Included with each amplifier
Power & Ground Terminals: Will accept up to 1/0 Gauge wire
DSP Reaction Time / Delay: 0.7 milliseconds
(In other Words...Real Fast!)
Friend’s Reaction: That Shizzle's Off The Hizzle
Stranger’s Reaction: Dude...Sweet...
Specifications common
to all models.