Filter
Top Products
25
SX .4 Series Amplifiers
Operation
Phase MENU - Here you can switch the polarity of each amplifi-
er’s channel(s) output between 0 or 180 degrees. There are two
PHASE menus, one for AMP 1 and one for AMP 2. This allows
each amplifier to have its own individual PHASE setting.
Use the
UP and DOWN keys to
scroll through
AMP-1 and AMP-2 and
press the
ENT key to select the
amplifier you want to adjust.
Use the
UP and DOWN keys to
scroll through
BOTH, LEFT and right.
Press the
ENT to select the one you
want to adjust.
Now use the
UP and DOWN keys
to select from
0 DEGREE or
180 DEGREE. Press the ESC to
return to the selected amplifier’s
PHASE menu.
When you are done adjusting the
selected amplifier’s phasing, press the
ESC key again to return to the
PHASE menu
AMP-1 / AMP- 2
options to select the other amplifier.
If done adjusting the phasing, press
the
ESC key again to return to the
MAIN menu.
HOME
ENT
ESC
HOME
ENT
ESC
NOTE...
While adjusting the PHASE you will notice the
PHASE
indicator on the ISIS VFD display is lit. This indicates you are
in the PHASE menu.
The
AMP1 or AMP 2 indicator will light up to indicate which
amplifier you are currently adjusting.
There is also a
LEFT and a RIGHT indicator that will light up to
let you know which channel (Left and/or Right) that you are
currently adjusting.
HOME
ENT
ESC
HOME
ENT
ESC
HOME
ENT
ESC