Filter
Top Products
15
SX .4 Series Amplifiers
Operation
Menu System
The menu system layout is as follows:
DEFAULT - This menu is displayed when your amp is
operating and no adjustments are being made to your amplifier.
This information scrolls through the display one after the other
and then repeats.
1.)
KICKER - Hey, we needed a brand plug for us since this
amp is sooooo cool!
2.)
XX.X Volts - Displays the current voltage at the
amplifier’s + 12 volt battery input terminal.
3.)
XX.X DEG f or xx.x DEG c - Displays the current
temperature of the amplifier in celsius or fahrenheit.
4.)
amp name - Model name of the amplifier or the name
you have changed it to.
5.)
memory name - Current memory preset in use (if
any) or the name you have changed it to.
If you want to freeze the scrolling
display simply press the
HOME key and
the scrolling will stop.
Now you can manually select the item
you wish to have displayed by using the
UP or DOWN keys.
If you want the display to continue scrolling simply press the
HOME key again.
MAIN - This menu is the first menu accessed from the
DEFAULT menu and is the gateway to all the settings and
information on your SX series amplifier.
To enter the MAIN menu simply press
the
ENT key while in the DEFAULT
menu.
The available selections in the MAIN menu are:
System
GAIN
EQ
Lo-Pass
Hi-Pass
Phase
Mute
Kompressor
Security
Use the UP and DOWN arrow keys
to scroll through the available selections
in the MAIN menu.
When you have the menu item
selected that you want to view or adjust
simply press the
ENT key to select it.
HOME
ENT
ESC
HOME
ENT
ESC
HOME
ENT
ESC
HOME
ENT
ESC
HOME
ENT
ESC