Filter
Top Products
• 4/¢ buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
• AM/FM buttons
Press the AM button to select the MW and LW bands.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
• DIRECT/OK button
During Preset station seek with programme service name mode,
selects station.
Enters and cancells the Direct access tuning mode.
• DNPP button
Enters and cancells the Preset station seek with programme
service name mode.
• 38 button
Enters and cancells the Programme Type Selection (PTY) mode.
• Number/letter entry buttons
Press buttons #1-6 to recall preset stations.
Use to enter frequency of the desired station during Direct
access tuning mode.
Tuner features
• The mode switches to the next mode from any mode which
cannot be used.
• The external disc control mode will differ depending on the unit
that is connected.
• You cannot use the AUX input function of the optional switching
adapter KCA-S210A if this unit is connected with the KCA-
S210A.
• If you have selected Standby mode, the timer function that
turns the power off automatically will be activated.
To find out how to set the time on the timer, and how to cancel
the timer function, refer to the section on the Power OFF Timer
function under Menu settings (page 45).
The Power OFF Timer function is enabled only after the security
code (page 39) is set up.
• ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning the volume up, or
turning it all the way down deactivates the attenuator function.
NOTE
▼
Tuner mode
▼
CD/MP3 mode
▼
External disc control mode 1
▼
External disc control mode 2 / AUX mode
TV(AUX)
▼
▼
Standby mode
— 47 —