Filter
Top Products
You can turn the non-fading output on and off whilst the
preout is switched to the non-fading preout.
Turning non-fading output On/Off :
Hold down the NF button for one second or more to set the
function ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.
Non-Fading Output
• In speaker setting mode
Press either the 4 or ¢ button to select the type of
speaker. The setting switches as follows.
Off ("Speaker Setting OFF") / For 6x9/6 in. speaker ("Speaker
Setting 6
*
9/6 inch") /
For 5/4 in. speaker ("Speaker Setting 5/4 inch") /
For the OEM speaker ("Speaker Setting O.E.M.")
• In woofer setting mode
Press either the 4 or ¢ button to select the type of Sub
woofer. The setting switches as follows.
"Woofer OFF" / "12in typeA" / "10in typeA" / "12in typeB" /
"10in typeB" / "12in typeC" / "10in typeC" / "8inch" / "12in
typeD" / "10in typeD"
Press the Q button to end the speaker setting mode and
woofer setting mode.
• Speaker setting allows for tuning of bass, middle and treble.
• Woofer setting allows for tuning of high-pass filter frequency,
low-pass filter frequency and non-fading level.
NOTE
5
4
Speaker setting mode
Woofer setting mode
Speaker setting allows the System Q settings to be fine-tuned
according to the type of speakers.
Woofer setting allows for Network configuration according to
the type of subwoofers.
Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
Press the Q button to enter the speaker setting mode.
Each time you press the FM/AM button, the mode switches as
follows:
3
2
1
Speaker & Woofer setting
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
The System Q function changes the values of the following
sound quality parameters:
Bass centre frequency, bass level, bass quality factor, bass
extend, middle centre frequency, middle level, middle quality
factor, treble centre frequency, treble level non-fading level, high-
pass filter frequency for front output, high-pass filter frequency
for rear output, and low-pass filter frequency for non-fading
output.
Their setting values are different depending on the setting of the
speaker and woofer setting mode.
NOTE
Flat (Default setting)
Easy
Rock
Jazz
Pops
Top 40
Scan of Flat – Easy
User memory*
*User memory:
The unit returns to the state
adjusted the last time with
the audio control setting feature.
— 17 —