Filter
Top Products
52
|
English
Basic Operations of remote control
Audio Control
[AUD] button
Selects the Audio item to be adjusted.
[VOL] buttons
Adjusts the Audio item.
• Refer to <Audio Control> (page 11) for the operation
method, such as the procedures for Audio control and
others operations.
• The remote control can only select and adjust the
Basic Audio item. Selecting and adjusting of the Detail
Audio item cannot be done.
Dual Zone System
[2-ZONE] button
Each time you press the button, "2ZONE" of
<Audio Setup> (page 11) is turned ON or OFF.
[5]/ [∞] buttons
Adjusts the volume of the rear channel.
The rear channel activates while the Dual Zone
System is ON.
In Tuner source
[FM]/ [AM] buttons
Selects the band.
Each time you press the [FM] button, the band
alternates between the FM1, FM2, and FM3
bands.
[4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning>
(page 28) mode.
[38] button
Enters and cancels the <PTY (Program Type)>
(page 31) mode.
In Disc source
[4]/ [¢] buttons
Going forwards and backwards between track/
files.
[
+]/ [–] buttons
Going forwards and backwards between disc/
folders.
[38] button
Each time you press the button, the song pauses
or plays.
[0] — [9] buttons
When in <Direct Track/File Search> (page 34) and
<Direct Disc Search> (page 34), enters the track/
file/disc number.
In DAB source
[FM] button
Preset Band Switching.
Each press of the [FM] button switches one step
among the DB1, DB2, and DB3 bands.
[AM] button
Primary/Secondary Switching.
Each press of the [AM] button switches between
Primary/secondary within the services.
[4]/ [¢] buttons
Service Switching.
Each press of the button switches the services
from within the Ensemble.
Switching the ensemble.
Each time the button is pressed and held for
longer than 1 seconds, the Ensemble changes.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset services.